Фільтрувати

Мої недавні пошуки
Фільтрувати по:
Бюджет
до
до
до
Тип
Навички
Мови
    Статус роботи
    1,389 atmel 636 робіт знайдено, ціни вказані в USD

    Hello, I look for a specific company that produced STM32F407 PCB with LAN and 485 ports about 2 years ago, the name of the persons were Ariel and Alan. If new candidates decided to participate, they have to prove that can develop complete embedded systems with STM32, Atmega, NXP, ESP32 as well PCB design, prototype and full production of assembled boards. I'll need the same team for forthcoming projects that I'll post here in Freelancer. The current requirement that will be used ONLY for proving skills: Short project for reading sms from SIM800L with ESP32 and search of a string with password inside the SMS. If password matches, ESP32 should send mail through wifi to given e-mail. C/assembler user for communication with GSM module, for e-mail can use Python. The work...

    $13 (Avg Bid)
    $13 Сер. заявка
    9 заявки
    Trophy icon Ad design for facebook and instagram Закінчився left

    Graphic ad design to be posted on Facebook and Instagram Must include: ‘Brand New Genuine Toyota Aqua/Fielder/Axio Hybrid Batteries Now In Stock! Price: $16,000 Installation Available In House! For Further Information you can contact us at 374-6528/681-1447/636-1313 Include logo and photo of the battery (attached) Also include photos of 2015 model Toyota Aqua Axio and Fielder

    $10 (Avg Bid)
    Гарантований
    $10
    78 робіт
    Embedded c programmer required Закінчився left

    Embedded c programmer required for programming MICROCHIP PIC and ATMEL AVR Microcontrollers. Mostly work required on ATMEGA328P and PIC16F877A Microcontrollers.

    $90 (Avg Bid)
    $90 Сер. заявка
    21 заявки

    I am in need of a firmware engineer with a strong skills in developing code for ATMEL SAMG processors. The focus of the project is to develop firmware that runs in our 5GV POD modules that interfaces with "plug in modules" that communicate with external sensors. We also require a firmware module that runs on the existing 5GV/Razor/Mini product and interfaces with the POD module(s). Key functions include: - Constructing firmware for the POD module to interface with plug-in modules that in turn, interface with external sensors like vibrating wire sensors, RS485 sensors, 4-20ma sensors, SDI-12 sensors, Pulse and Voltage Input sources. - Developing a module for the 5GV/Razor/Mini gateway/logger that drives one or more PODs. This includes configuration, interrogation and data ...

    $4646 (Avg Bid)
    Терміновий Угода про нерозголошення
    $4646 Сер. заявка
    6 заявки

    Need a PCB designed using the ATMEL SAM21D + SIM7020G and should have the proper resistance trace and connector for an external LTE antenna. It should use a usb connector to program the SAM21D in a similar way to the Arduino MKR Zero. The Atmel microcontroller will be connected to the SIM7020G in such a way to send data over LTE of course. Additionally, there should be 3 channels to measure voltage between 6-40v using the Atmel's onboard ADC. Cost of components should be a consideration. Designs should be submitted in Eaglecad format.

    $452 (Avg Bid)
    $452 Сер. заявка
    30 заявки

    I require assistance with programming and configuring an Atmel M90E36A. - Task: The primary service needed is writing a C++ code for the stated IC, which will allow for an auto calibration code from Microchip to be implemented. - Outcome: Ultimately, the implementation of this code should result in improved precision of readings. Ideal Skills and Experience: Proficiency in C++ is a must, along with prior experience in dealing with IC programming. Experience in working with Atmel M90E36A specifically, will be an added advantage. Knowledge on Microchip technology and calibration methods would be beneficial in achieving the desired outcome.

    $40 / hr (Avg Bid)
    $40 / hr Сер. заявка
    18 заявки

    Будь ласка, зареєструйтесь або увійдіть в систему для перегляду деталей.

    Обраний Терміновий Прихований Угода про нерозголошення
    Single-sided PCB Design Закінчився left

    i make Zbr file from EasyEDA but not sure about the circuit connection and route. So need a Pro PCB designer for make my connection perfectly completed . Along with i have added a image of completed pcb. Having a knowledge about the electronics component ie ATMEL MICROCONTROLLER (ATMEGA8A) , CAPACITOR, RELAY, & USR-TCP232 . I require a designer experienced in single-sided PCB designs, accommodating for a larger size - Approcx 15*15 cm. Although the circuitry involved in this project is simple with limited components, attention to detail will be paramount to achieving the project objectives. The ideal candidate will have a proven track record in designing large, single-sided PCBs with simple circuits. Familiarity with standard industry tools such as Eagle or KiCAD would be ad...

    $15 (Avg Bid)
    $15 Сер. заявка
    18 заявки
    Split & Organize Full Names in Excel Закінчився left

    I'm in need of someone with advanced Excel skills to help me deal with a significant data cleanup task. Currently, I've got an Excel sheet grappling with the following issues: - The first names and last names are mixed and stored in one column. - These names lack a consistent format, with some having the first name come first,...format for the separation isn't strictly defined, you're free to apply any setup that results in clear separation of first names and last names. The ideal freelancer for this job should have: - Proven experience in data cleanup within Excel. - Excellent problem-solving skills to handle different data configurations. - A keen eye for detail and accuracy, to ensure each entry is correctly split. 636 records. Tell me how long it will tak...

    $20 (Avg Bid)
    $20 Сер. заявка
    237 заявки
    AVR Motor Control & Sensor Interface Закінчився left

    This project involves the design and implementation of a motion controller for a DC motor, incorporating precise speed control through Pulse Width Modulation (PWM) and real-time feedback using an encoder. The system utilizes an AVR microcontroller (ATMega328p) and involves programming in the C language within the ATMEL Studio 7.0 development environment. 1. **PWM Speed Control**: The heart of the system lies in its ability to regulate the speed of a DC motor through PWM. The PWM parameters can be configured and controlled, providing flexibility in adjusting the motor speed. 2. **Encoder Feedback**: To ensure accurate speed measurement, an encoder is integrated into the system. This feedback loop allows the controller to continuously monitor the motor speed 3. **USART Communicat...

    $333 (Avg Bid)
    $333 Сер. заявка
    26 заявки

    I am looking for a skilled C++ code programmer who can assist me in transferring data in real-time from an Atmel 860 microprocessor to a Windows laptop. The main goal of this project is to store the transferred data in a matrix format on the laptop. Skills and Experience: - Proficient in C++ programming language - Strong understanding of microprocessors, specifically Atmel 860 - Experience with real-time data transfer and storage - Familiarity with Windows operating system Key Requirements: 1. Data Transfer: Develop a robust and efficient code to transfer data from the Atmel 860 microprocessor to the Windows laptop in real-time, ensuring a fast transfer rate within milliseconds. 2. Data Storage: Implement a code that stores the transferred data in a matrix format on...

    $250 - $750
    Прихований
    $250 - $750
    35 заявки

    Sound Engineer who specializes in Dub-style Reggae music similar to “Stick Figure” and “Mellodose” in accentuating vocal echoes / delays including the following software: Valhalla reverb, Deep Verb, Aurturia Spring 636, H-delay, and Echo boy. The goal is to get a Chill, Trippy and Mysterious sound from the two singers (male and female). Budget: $100 Deadline: By Nov 30th Tools: We will provide the backing Beat track already Mixed and Mastered (1 file) and 8 raw vocal stem tracks recorded in 32-bit WAV 41KHz that need to be incorporated for a final mix. We have included the sheet music, chords, and lyrics for your reference. Links: You can listen to the raw stems at the following link. We prefer to

    $88 (Avg Bid)
    $88 Сер. заявка
    26 заявки
    visual basic. net Закінчився left

    Hello, I am looking for an experienced programmer in VB.Net. I have some minor experience but I am in the weeds now and am stuck. I will pay $85. 00 an hour, but prefer in-person tutoring if possible, though my main criteria is that this person is either an experienced programmer or at least an advanced student. Please get back to me if you are such a person looking fo...Net. I have some minor experience but I am in the weeds now and am stuck. I will pay $85. 00 an hour, but prefer in-person tutoring if possible, though my main criteria is that this person is either an experienced programmer or at least an advanced student. Please get back to me if you are such a person looking for part-time work for probably around 12 to 16 weeks. My name is Jim and my cell is (636) 459-4563....

    $58 / hr (Avg Bid)
    $58 / hr Сер. заявка
    32 заявки

    I am looking for a freelancer who can help me with Mitsubishi PLC programming based on C firmware whihc is written for STM/ATMEL controller on our PCB MCU. The specific model of the PLC is FX Series. I need the plc software to be created from scratch based on C firmware written in IDE compiler The main goal of this project is to achieve process automation through the PLC program. The ideal freelancer should have experience in C programming and Mitsubishi PLC programming, specifically with the FX Series. Skills and experience required for this job: - Proficiency in C programming - Experience with Mitsubishi PLC programming, preferably with the FX Series - Strong understanding of process automation If you have the necessary skills and experience, please submit your proposal for th...

    $18 - $150
    Прихований
    $18 - $150
    4 заявки

    The code must wait for new data, and if received must save it in a buffer (array of char) and respond with echo of same data as an acknowledgment. The code has to be fast enough to handle data and send back acknowledging echo at high rate (>10KHz)

    $33 (Avg Bid)
    $33 Сер. заявка
    3 заявки
    SAMD (Atmel/Microchip) programming Закінчився left

    Project Title: SAMD (Atmel/Microchip) programming Description: I am looking for a freelancer who is skilled in programming the SAMD21 microcontroller, especially the SAMD21's internal configurations. I am a skilled C programmer with much experience with Atmel/Microchip microcontrollers, using ASF sometimes (when it's convenient) but also coding without ASF. However, sometimes I encounter problems getting the correct C code to configure some aspects of the SAMD microcontrollers. I am looking for expert help so I don't have to spend too much time working on unexpected SAMD configuration difficulties. Specific freelancer requirements: - Very experienced in programming the SAMD21 microcontroller - Proficient in programming languages C Timeline: - The project t...

    $37 / hr (Avg Bid)
    $37 / hr Сер. заявка
    28 заявки
    Securely program ATSAMD51 Закінчився left

    I'm looking for a freelance prog... but not be able to be extracted or read back by determined people - i.e. fuses and other security features on the ATSAMD51 will need to be employed. I do not want people to extract the program or code and then be able to upload it onto copied devices. I do not require write protect, only read protect. I have ATMEL Studio (on a PC) and a Segger J-Link Mini. I am happy to purchase additional software or equipment as needed. In the past, I put a Bootloader on the chip with ATMEL Studio and the J-Link; but, then used the Arduino IDE to upload the programmer via a USB. I would like the process to be on a word doc, be very clear, step by step and preferably have photos as part of the explanations. The successful applicant may have lots...

    $284 (Avg Bid)
    $284 Сер. заявка
    16 заявки
    AVR C - Selectable Dial Закінчився left

    ...interfaced to an ATTiny84A. Only 6 positions are to be used, and the position will be queued up with a single push button. The purpose of the dial is to provide input selection, to the ATTiny84A and will turn on power to either 1 or 2, of 3 PORTB pins. This will also require adjustment of PWM on several pins that I will need to adjust several times through the project. I would prefer this be done in Atmel studios as that is what I use, but any format in which I can adjust the duty cycle would be sufficient. This will most likely require software PWM on PB0 due to the use of PB0 through PB2. All the electronics for this project are in breadboard testing and can easily be changed if necessary. I have started writing AVR C code for this. However I am not nearly as proficient in AV...

    $398 (Avg Bid)
    Угода про нерозголошення
    $398 Сер. заявка
    17 заявки

    I am looking for a skilled freelancer who can design a BLDC ESC PCB and develop the necessary software. The project requirements are as follows: Voltage Range: - The required voltage rang...follows: Voltage Range: - The required voltage range for the ESC is 3S to 6S. Microcontroller Preference: - I have no preference for the microcontroller to be used in the ESC. Intended Application: - The ESC will be used for an RC model. Skills and Experience: - Experience in designing BLDC ESC PCBs. - Proficiency in developing software for ESCs. - Knowledge of microcontrollers, preferably Atmel or Texas Instruments. - Familiarity with RC models and their specific requirements. If you have the necessary skills and experience, and are interested in working on this project, please submit your...

    $533 (Avg Bid)
    $533 Сер. заявка
    13 заявки
    11 Banner for web site Закінчився left

    I am looking for a skilled graphic designer to create 11 banners to open the most played slots in our website. The desired sizes for the banners are: 1x 1296 x 374 2x 636 x 374 8x 306 x 459 Dimensions are approximate, banners will be formatted as shown in the attached image. The most played slots and banner dimensions are: - 1296 x 374 Netent: Dead or Alive - 636 x 374 Amatic: Hot Neon - 636 x 374 Netent: Starbust - 306 x 459 Netent: The Reel Steal - 306 x 459 Novomatic: Columbus Deluxe - 306 x 459 Egt: Ancient Dinasty - 306 x 459 Egt: Zodiac Wheel - 306 x 459 Novomatic: Book of Ra - 306 x 459 Amatic: Lucky Joker 5 - 306 x 459 Pragmatic: Big Bass Splash - 306 x 459 Pragmatic: The Dog House Each banner must contain: - the original logo of the slot - the name...

    $127 (Avg Bid)
    $127 Сер. заявка
    139 заявки

    Estou na dúvida em relação a quanto um equipamento com uma produtividade média de 1700 toneladas por hora, produziria em 636 horas. Se considerarmos uma relação minério/estéreo de 1:1 e um valor de 113 dólares por tonelada de minério produzido, quanto essas 636 horas de produção representaria em reais?

    $2 / hr (Avg Bid)
    $2 / hr Сер. заявка
    8 заявки

    ...wheelchair should be able to operate using a programmable control system controlled by joystick - This will allow for customization and fine-tuning of the wheelchair's performance. - it should be close loop system sensing the back EMF to manipulate the speed verse the torque and also sensing the maximum current to do chopping PWM as necessary 2- CONTROLER AND FEATURES : - USING STM or ATMEL controller - the mechanical body of the wheelchair already made and wghit almost 55kg . - it consist of tow battery each 12 volt connected in series. - dual dc motor each 24 volt with maximum current of 7A - THE SPEED OF THE MOTOR IS 3000 rpm and has a gear ratio of 1:10 - each dc motor contain electrical brake system . 3. Reverse Mode - The wheelchair should ...

    $446 (Avg Bid)
    $446 Сер. заявка
    30 заявки
    Mfrc522 with atmega328p Закінчився left

    I have all the code, but it’s not working the rfid.. and I don’t know why, the language is c and i work in atmel studio.

    $11 (Avg Bid)
    $11 Сер. заявка
    14 заявки

    Request details I have a C program in Atmel Studio 7 which currently uses a ATSAMS70 to control a radar SOC. The program was originally provided by the radar SOC manufacturer and runs on a development board created by the radar SOC manufacturer. I need help getting the code to run on a new board, still using an ATSAMS70, that has a few changes including removing the external RAM.

    $96 (Avg Bid)
    $96 Сер. заявка
    12 заявки

    Godspeed Internship Problem Statement Community events Internship Problem Statement Community events godspeedadmin 1 20d Problem Statement Create a API backend for a restaurant app, using Godspeed Framework 636. which has below REST API’s: Method URL Description GET /reataurant/:restaurantId Fetch a restaurant by restaurantId POST /reataurant Createa a new restaurant PUT /reataurant Update an existing restaurant DELETE /restaurant/:restaurantId Delete an existing restaurant POST /restaurant/search Fetch restaurants of a particular city, and have Menu Items also in the response, If `couponCode` is provided, it should filter only those menu items which are for that code. Populate database with atleast 5 restaurants Some coupon codes are HUNGRY25, HUNGRY50 Steps Install Gods...

    $17 (Avg Bid)
    $17 Сер. заявка
    5 заявки

    Install a Firewall for your CentOS Server. Please use firewalld, a zone-based firewall for your installation. 2. Add the created zones ( & ) for the Firewall. 3. Add the following port to the Firewall ▪ 636 ▪ 161 ▪ 50000 4. Allow HTTPS service through the Firewall I want this within 5 hours. Only $12 can offer. BID IF YOU AGREE ONLY

    $17 (Avg Bid)
    $17 Сер. заявка
    12 заявки
    Trophy icon Flyer for Open house for vehicle Закінчився left

    ...Road McBean Couva Must also include lines: Loans Officers From All Major Banks, Credit Unions & Finance Companies Will be On Site On The Spot Approvals. Up to 100% Financing Available Insurance Quotations Also Available! Our Fully Electric 1967 VW Bug Conversion & Sheldon Bissessars Record Breaking Rail Car Will Also be on Display ! Contact Us for Further Information: Tel: 374-6528/636-1313/681-1447...

    $20 (Avg Bid)
    Гарантований
    $20
    90 робіт
    Trophy icon Ad for Instagram - 12/03/2023 06:42 EDT Закінчився left

    Here is description on what is going on: We army army platoon looking for aid from all over, gear and $, whatever! So, the must have all the text somehow, and some colors, background, whatever, naybe with Ukraine colors and military colors, whatever use your imagination, bring few options, it'll be usedon Instagram. ...pickaxes, monoculars and binoculars, CAT tourniquets. The list is quite big so working on gathering connections of those who can potentially help. For donations and help, please use: 5169360009178991 EUR MasterCard 5169360009178983 USD MasterCard 0x26c79d86e0BABF8991dE80a9B5385d92d35e4901 ETH bc1qd3n7k2mglqc0jva5kpsslamcdgktf4ku8q74yx BTC Here is my US phone +1 585 326 0030 Ukraine phone +380 67 636 0367 (WhatsApp/Viber sign) With support of Old Sport Dispatch (...

    $50 (Avg Bid)
    Обраний Терміновий Гарантований
    $50
    106 робіт
    I contacts test system Закінчився left

    write source or help trouble shoot using debugging tools our existing code. C (Arduino IDE) but prefer to use Atmel Studio Using ATmega328 or ATMega168P QFP CPU Monitor 5 I/O pins - to determine if a switch contact is open or closed Closed is Good, open is alarm condition Also use A/D to drive an LM84T temperature sensor and measure once per minute Alarm condition if temperature is over 75C once per 5 minutes - use serial lines to operate and send a message using HopeRF RFM95 LORA radio module. (this is a 'status ok' message) We have library for this radio module When alarm conditions occur (contact open or temperature >75C) alarm message sent. Message payload is 6bits - we have this defined. Device sends messages only 1650mAH battery - target 5 years life We have this...

    $27 / hr (Avg Bid)
    $27 / hr Сер. заявка
    22 заявки
    Need Electronics R&D Engineer Закінчився left

    ...product ideas, and designing mockups of proposed products. Develop and complete projects Sourcing of raw materials. Purchase electronics device and equipments depending upon project needs Troubleshooting embedded systems and diagnosing errors, malfunctions, or inefficiencies firmware drivers for hardware peripheral ICs. Analog, Digital, mixed signal, wireless & rf electronics design. Microcontroller (Atmel, ST, Renesas, Microchip, ARM etc.) based system design,development, and testing, Embedded C/C++ Programming. Implementing effective repairs, modifications, and upgrades to the embedded systems Schematic creation according to hardware design and PCB layout design with implementation using CAD tool (Altium) GSM Module, GPS Module, Wi-fi Module, Ethernet transceiver, SD Card i...

    $13 / hr (Avg Bid)
    $13 / hr Сер. заявка
    27 заявки

    Hi, How are you doing. I am looking for electrical engineers to work on multiple tasks in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. I am looking for long term work relationship. New freelancers are warmly welcomed. Important Note: I need dedicated freelancers who strictly follow the deadline and give me good quality work without any plagiarism.

    $149 (Avg Bid)
    $149 Сер. заявка
    42 заявки

    I want to generate an I2C slave with a SAMD21. This should have write and readable registers. Unfortunately I can't get this to work. I was guided by the following code: From page 39: The final application “High speed Configuration” in main.c file will be as below for SLAVE. The aim is to provide 256 registers (1 byte in size) with the SAMD21 (as Slave). The I2C master can write and read these registers. Your task is to create this functionality based on the provided example. Only the function "void SERCOM2_Handler(void)" may be adjusted. The I2C master works in FAST_MODE_PLUS. Therefore, the rest of the configuration must remain exactly the same.

    $707 (Avg Bid)
    $707 Сер. заявка
    9 заявки

    Hi Sardar I need you to write a research report on Atmel comparison with PIC chip. I need 20 pages report with references and tables.

    $700 (Avg Bid)
    $700 Сер. заявка
    1 заявки

    Miniature battery operated circuit with a few I/Os driving a solenoid. Expertise with a Nordic, Atmel or similar Wireless Microchip is a plus. Located Tulsa, Oklahoma, USA

    $36 / hr (Avg Bid)
    $36 / hr Сер. заявка
    25 заявки
    LDAP 389 to LDAPS 636 Закінчився left

    Hi, I have an open ldap working fine on port 389 on a Ubuntu 20.04 LTS on Amazon Lightsail I would like to securize it by adding SSL so making it work bu port 636

    $163 (Avg Bid)
    $163 Сер. заявка
    15 заявки
    Embedded Software development Закінчився left

    We require a embedded software developer to examine the program and change it according to the new PCB also require you to write libraries and working code without altering the other functions. The component in question that has been replaced is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a mutually agreeable figure.

    $341 (Avg Bid)
    $341 Сер. заявка
    23 заявки

    We need an A5 flyer (and possibly A4 poster) for our charity halloween haunt. A rough idea of what we're after and the text to include is on the image ending 636. I've also attached some licensed photos and fonts that we like (though happy to use others if you have better ones) :) More info on the haunt: It's for 4 nights & and the theme is CarnEvil (lots of clowns, fog, strobes, live actors, creepy haunted music, animatronics and general scares). It's free entry though we'll be collecting donations for the RNLI (Lifeboat Rescue Folk) and our local drama group. Text on Flyer CARNEVIL Face Your Fears FREE ENTRY Donations to RNLI & Downderry Drama Group 4 NIGHTS of FEAR Fri 28th - Mon 31st Oct 6 to 9pm SEATON VALLEY HAUNTED HOUSE 'ALOHA SPIR...

    $64 (Avg Bid)
    $64 Сер. заявка
    48 заявки
    Display driver program Закінчився left

    We have a display currently using an Atmel Mega 8 processor with RS-232 input. It now needs Ethernet input and program upgrading via the Ethernet

    $1125 (Avg Bid)
    Угода про нерозголошення
    $1125 Сер. заявка
    11 заявки
    task for learning Закінчився left

    ...accountinformation in an automated way. Former IAM solution has an available LDAP catalog where the identities is placed. One Identity has an REST API that can be used to update identities. See documentation: Old IAM solution (LDAP catalog information) Hostname: Port: 636 Creds: SDS_LDAP Password: SDS_LDAP (we disregard sertification handling) OU=accounts,ou=UIA,DC=SKE,DC=NO User; Tom Olsen, uid=4421102 New IAM solution (API information) Host: Creds: REST_USER Password: REST_USER (we disregard sertification handling) user; Tom Jones, uid=4421102 Make a simple powershell script that reads existing surname from old IAM solution

    $30 (Avg Bid)
    $30 Сер. заявка
    1 заявки

    basic servo control (i.e. group actions) with ps2 controller and bluetooth android user interface. hardware is assembled, servos connected. powered with serial and bluetooth connections available.

    $46 (Avg Bid)
    $46 Сер. заявка
    8 заявки

    ...replace an outdated component with a new one and arrange the components in a different layout on to the PCB We also require you to write libraries and working code without altering the other functions. The component in question is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working with CAD (any electronic cad will work),Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend web application developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a...

    $155 (Avg Bid)
    $155 Сер. заявка
    20 заявки
    AtMel 4DGenie help required Закінчився left

    To work on legacy programs - debug and later re-wrie Preferably Southern England

    $36 / hr (Avg Bid)
    $36 / hr Сер. заявка
    18 заявки

    I HAVE A WEBSITE BEING MADE AND I NEED TO MAKE A THREE BOTTLE(SPICE BOTTLE) BANNER. THE DIMENSIONS MUST BE 636 X 611 (PIXELS) AND THEY MUST BE HIGH DEFINITION AND TRANSPARENT. THEN, I ALSO NEED A PRODUCT DESCRIPTION/DETAILS PAGE. 428 X 495(PIXELS) ALSO HIGH DEFINITION AND TRANSPARENT.

    $68 (Avg Bid)
    $68 Сер. заявка
    40 заявки
    Atmel Studio Help Закінчився left

    I am new to Atmel Studio and having lots of trouble when building a project that I inherited. I need interactive help on Zoom.

    $38 / hr (Avg Bid)
    $38 / hr Сер. заявка
    27 заявки

    Hi this is the scope: E users authentication + products + events (paid both) + surveys + contact channels + elementor pro for pages able to do so?

    $442 (Avg Bid)
    $442 Сер. заявка
    44 заявки
    $527 Сер. заявка
    33 заявки
    $848 Сер. заявка
    10 заявки