Фільтрувати

Мої недавні пошуки
Фільтрувати по:
Бюджет
до
до
до
Тип
Навички
Мови
    Статус роботи
    11,809 d modelling and autocad робіт знайдено, ціни вказані в USD
    Autocad Designing 6 дні(-в) left

    Urgently need Autocad Expert for Solar Rooftop structure designing. 1) For Auditorium in school left area of 8 feet for Stage. 2) 5 feet leave an area in middle for walking. 3) 1.5X1.5 feet chair how many will come in one hall. 4) Shed slant right side of each design. 1) Solar installation on Shed of Auditorium. a) 2mtr X 1mtr. one solar panel size

    $15 (Avg Bid)
    $15 Сер. заявка
    13 заявки
    Autocad drawing preparation 6 дні(-в) left
    ПІДТВЕРДЖЕНО

    ...models need to be extracted into dwg and edited to make autocad drawings for an authority approval submission. I will provide a manual for the layer names, object types, drawing elements etc. and other instructions on how to prepare the drawings. 6 plans, 2 sections and one elevation have to be extracted from Revit and prepared as per manual. Refer to

    $95 (Avg Bid)
    $95 Сер. заявка
    32 заявки

    ...different degree of slope: South tilts in 18 degrees, North 15 degrees, West 16 degrees and East 24 degrees (these are approximate angles - true angles are to be taken from the autocad drawings. I am hoping you are able to take a section through the building as indicated and a second section through a lower portion of the roof assembly to determine if the

    $39 (Avg Bid)
    $39 Сер. заявка
    5 заявки

    I have two visio files that we were told were drawings but they look like images instead. I need the images to be replicated in autocad as an actual drawing. Timeline is pretty short only a few days

    $333 (Avg Bid)
    $333 Сер. заявка
    70 заявки
    30 Minute Online Mock Demo Class for ESL 4 дні(-в) left
    ПІДТВЕРДЖЕНО

    ...students between the ages of 5-10 years old. you’re expected to demonstrate your teaching skills and strategies using the teaching materials already provided. There is also an instructional video you can mimic. The demonstration should last no less than 15 minutes and no more than 20 minutes. With a team member pretending to be your student, a comprehensive

    $121 (Avg Bid)
    $121 Сер. заявка
    3 заявки

    I have [увійдіть, щоб побачити URL] sketch drawing i want to design this autocad 2D drawing & 3D revit drawing

    $41 (Avg Bid)
    $41 Сер. заявка
    59 заявки

    ...atteched, and I'll be sharing the .dwg file when the project is awarded. List of changes I require to be done: 1- as you will notice when check to floor plans, the second floor is lagging back a bit compared to the base floor. this causes columns to block the view of the right most bedroom. I don't want any columns to block the view on base floor and top

    $553 (Avg Bid)
    $553 Сер. заявка
    68 заявки
    Expert EXCEL VBA Developer Required - Work From Home 4 дні(-в) left
    ПІДТВЕРДЖЕНО

    ...Needed ASAP - Work From Home Want to Work from home on Various Exciting and Challenging Projects? We are seeking to hire a Team member who has an EXPERT STATUS in ALL these following areas: • Expert in VBA Application Development in Excel; • Expert in All Excel Functions and Formulas; • Expert in Process Automation Using Excel VBA • Expert in Data

    $524 (Avg Bid)
    Обраний
    $524 Сер. заявка
    18 заявки
    autocad drawing 2 дні(-в) left

    2d Plan, working drawing, joinery, saintry and electrical drawing

    $18 (Avg Bid)
    $18 Сер. заявка
    36 заявки

    Delivering revit files from supplied AutoCAD files

    $18 / hr (Avg Bid)
    $18 / hr Сер. заявка
    81 заявки

    Well I want a concept art and a 3D modelling for a game I am creating on Unity. I want an elf village in the middle of the forest, and that has the charm of the elves.

    $433 (Avg Bid)
    $433 Сер. заявка
    17 заявки

    We want to change our Autocad Architecture System from 2010 to 2019. We need help for getting all our enviroments, walls and texts to the new System.

    $124 (Avg Bid)
    $124 Сер. заявка
    22 заявки

    ...piece is inserted into either key 1, 2 or 3 and 4 and it is used to undo or tighten the lid. -PLEASE READ THIS DESCRIPTION CAREFULLY- I have already had a friend draw up the designs in auto cad i just want the drawings adjusted slightly, but i also need the tee piece drawn up on auto cad, and then all 4 disks and the tee piece 3d modeled so they can be

    $35 (Avg Bid)
    $35 Сер. заявка
    13 заявки
    3D realistic Caterpillar 2 дні(-в) left
    ПІДТВЕРДЖЕНО

    ...realistic 3D caterpillar with moving animation in the same place. This will be used in a website (moving animation will be done in css animation), Just want the caterpillar and moving body, legs in the same place. Please check attached images for how much quality we expect Sample animation (Just caterpillar - it will appear from right after few seconds)

    $135 (Avg Bid)
    $135 Сер. заявка
    10 заявки
    Ebay Sales / Product Listing - SEO /Terapeak Expert 2 дні(-в) left
    ПІДТВЕРДЖЕНО

    We currently need an experienced EBay expert to go over our EBay listings and help us optimize them to convert to more sales. We are looking for a highy qualified eBay expert to manage and optimize our listings and store. We currently use Terapeak for keyword and competitor research etc but we are open to using any new software recommended by the chosen

    $18 / hr (Avg Bid)
    $18 / hr Сер. заявка
    21 заявки

    Looking for a freelance graphic designer to complete regular projects of varying size for events. Other Favourable Skills (not necessary) - Animation - 3D Modelling

    $170 (Avg Bid)
    $170 Сер. заявка
    16 заявки
    Autocad blue print 1 день left
    ПІДТВЕРДЖЕНО

    I need someone to help me draw blue prints for a factory

    $127 (Avg Bid)
    $127 Сер. заявка
    45 заявки
    Autocad plans for home 1 день left
    ПІДТВЕРДЖЕНО

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $26 (Avg Bid)
    $26 Сер. заявка
    79 заявки

    I am looking for an Expert/Experienced Auto-CAD Designer to help sketch my concept, design and showcase a 3D version of the product as well as suggest the best textile options. I am looking for someone who can create this concept and be able to meet the desired details based on the functionality of the product. I have uploaded pictures to give an

    $208 (Avg Bid)
    Угода про нерозголошення
    $208 Сер. заявка
    19 заявки
    Autocad plans for home 1 день left

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $39 (Avg Bid)
    $39 Сер. заявка
    21 заявки
    AutoCad Drawing for a stuctural design for a retaining wall 19 годин(-и) left
    ПІДТВЕРДЖЕНО

    We need the design by a structural engineer, using AutoCAD, of a retaining wall using geocells, geogrids and geotextile, based on a topographic survey, taking into account all vectors, topography of the field, seismic risks, etc. Width of 50 meters and high of about 15 meters. 8 Drawing profile sections to be delivered with all volume of material required

    $374 (Avg Bid)
    $374 Сер. заявка
    27 заявки
    Autocad designer 18 годин(-и) left

    Design a drone frame as directed.

    $88 (Avg Bid)
    $88 Сер. заявка
    25 заявки

    Modify 2-D AutoCAD files to reflect as built changes for elevations and plan view. Drawings are for residential kitchen, bar and media room. PDF of changes needed is attached. DWG files are available in AutoCAD 2016 and 2018 versions.

    $348 (Avg Bid)
    $348 Сер. заявка
    26 заявки
    Draw me a AutoCad project Закінчився left

    I need to draw bilge suction strainer Plan Ground plan side view If someone wants to do this for me just upload file in dxf and send it to me.

    $25 (Avg Bid)
    $25 Сер. заявка
    70 заявки
    Autocad plan and quick sketchup model Закінчився left

    A single plan traced on autocad at scale 1:1 (approximately 2 hours). I then need this modelled quickly in Sketchup showing 2 scenes: one interior one exterior (approximately 2 hours). Done by sunday 13 january 2019

    $76 (Avg Bid)
    $76 Сер. заявка
    20 заявки

    Please, inform me If you are able to create me FDS modelling by pyrosim software! It is a simulation of a tent fire.

    $25 (Avg Bid)
    $25 Сер. заявка
    1 заявки
    Project for Cristian T. 17 годин(-и) left

    ...princebashir924@[увійдіть, щоб побачити URL] I have learned AutoCAD 2D and 3D,3D modeling,oracle primavera and have done 2 projects before which was completely satisfied by the client and it was a very well and good experience in the project for me as well as for the client. So I am looking to freelance more projects on AutoCAD 2D and 3D,3D

    $213 (Avg Bid)
    $213 Сер. заявка
    1 заявки

    We do coordinated 3D modelling and shop drawings on the basis of given design documents, related to HVAC, Mechnical piping, plumbing,Fire protection and Electrical. We are using various softwares like Revit mep, Fabrication CADmep, Navisworks, Autocad etc.

    $14 / hr (Avg Bid)
    $14 / hr Сер. заявка
    1 заявки
    Build a simulation platform Закінчився left

    We are looking for an expert developer to build a simulation/modelling platform for Mac & Windows or Web Technologies, with advanced capabilities similar to this video: [увійдіть, щоб побачити URL]

    $2562 (Avg Bid)
    $2562 Сер. заявка
    16 заявки

    I need an Hvac plan of 2d plan.I will provide you dwg file of 2d plan,and you have to make Hvac plan of [увійдіть, щоб побачити URL] plan sketch will be provided. Thanks

    $50 (Avg Bid)
    $50 Сер. заявка
    45 заявки
    Marketing Strategiser Wanted Закінчився left

    I would like to gain a stronger market on my instagram site , and generate more flow and consumer traffic to build my modelling and personality brand.

    $256 (Avg Bid)
    $256 Сер. заявка
    21 заявки

    We need a 3D Architectural expert and Unity expert to create a 3D building and deliver the 3D model as a .prefab format - ready to use in Unity. As well as deliver the 3dmax scene. No renderings required. We have all the building specifications, materials and cad files. This project will need further updates and more specific features to implement

    $503 (Avg Bid)
    $503 Сер. заявка
    17 заявки
    AutoCAD work interior design Закінчився left

    I need a 3D model of something.

    $37 / hr (Avg Bid)
    $37 / hr Сер. заявка
    33 заявки
    $278 Сер. заявка
    29 заявки
    Autocad Design for a Warehouse Закінчився left

    ...looking for an autocad designer who can create a site plan for a sufferance warehouse (type: cw) the description for the security requirements will be provided, along with the floor plan sketches. The drawings must specify the necessary safety and security features of the property, depicting the designated storage area, sprinklers and fire retardants

    $327 (Avg Bid)
    $327 Сер. заявка
    75 заявки

    I am deve...gay male adult entertainment products which require 3D modelling for some components. I have an initial product i am developing with the desire to launch my own brand and range. I am interested to find someone who is open minded to work on this type of product, helping with the initial design and if we work together well to work on more.

    $285 (Avg Bid)
    $285 Сер. заявка
    54 заявки
    3d design motorcycle Закінчився left

    Hi thier I'm a custom motorcycle builder who looking for some one who has 3d design and modelling skills to help me design a 3d custom motorcycle fuel tank If you are interested please contact me Thanks

    $54 (Avg Bid)
    $54 Сер. заявка
    36 заявки

    ...skp But the Company who produced it for me can´t work with SketchUp files. They need a 3D-Autocad Model in .iges As beginner i tested the easiest way to convert the file but it don´t worked. I Saved my project in Sketchup as .3ds --- open with FreeCad and it looks identic with the SketchUp Model then I Save the Model as .iges in FreeCad But

    $34 (Avg Bid)
    Гарантований
    $34
    9 робіт
    Autocad drafter - Video Закінчився left

    We are looking for someone who have excellent skills in producing a video of a resort which is going to be build soon. This animated video must invite the viewer to come to the resort.

    $1089 (Avg Bid)
    $1089 Сер. заявка
    30 заявки
    Autocad 2d drawing project Закінчився left

    I have project in autocad drawing, Urgent.

    $87 (Avg Bid)
    $87 Сер. заявка
    40 заявки

    An im...roads, building foot prints outline,water bodies in layers and to the scale of 1:1 taking road of 9m r the scale provided by the Google Earth as reference point. Scaling of Image should also be done by yourself in AutoCAD. An sample of area size is being [увійдіть, щоб побачити URL] details will be discussed and shared after allotment of the project to you.

    $34 (Avg Bid)
    $34 Сер. заявка
    5 заявки

    You will need to make 3d models, and 2d models and drawings to pdf. I only have pictures of the item that needs to be 3d modelled in solidworks/edge/autocad. Model is with chain drive.

    $122 (Avg Bid)
    $122 Сер. заявка
    85 заявки
    Convert PDF drawings to Autocad 2014 Закінчився left

    I have 6 sheets of PDF drawings I need converted into Autocad 2014. Lines and hatches must be solid, unbroken Pages 9 to 15 inclusive

    $83 (Avg Bid)
    $83 Сер. заявка
    116 заявки
    Need autocad expert-Ongoing work Закінчився left

    I have autocad drawing project. this project will be ongoing for 1-2 month. I will share details with wining bidder.

    $131 (Avg Bid)
    $131 Сер. заявка
    26 заявки
    hvac mep revit modelling Закінчився left

    doing HVAC modelling on revit software as well as coordination with different trades

    $6 / hr (Avg Bid)
    $6 / hr Сер. заявка
    7 заявки
    Autocad Plan Закінчився left

    I want tomeone to draw me a plan for construction project

    $147 (Avg Bid)
    $147 Сер. заявка
    119 заявки
    Algo developer (c++ , Java, Python) Закінчився left

    We are looking for a strong and enthusiastic lead developer with Scrum master experience to join a highly-innovative project in digital asset exchange (Crypto assets). You will be working in a small, dynamic and highly dedicated team on implementation of an algorithmic trading platform, trading strategies, and risk management solutions, Crypto liquidity

    $13 / hr (Avg Bid)
    $13 / hr Сер. заявка
    13 заявки

    Hello. I need a hand drawn scheme for 2 objects from an adjustable pipe stand (pipe roll and base) each drawn in front end view, top view and side view. I can provide a scheme for the whole pipe stand. More info over chat!

    $27 (Avg Bid)
    $27 Сер. заявка
    42 заявки