Фільтрувати

Мої недавні пошуки
Фільтрувати по:
Бюджет
до
до
до
Тип
Навички
Мови
    Статус роботи
    36,689 drawings робіт знайдено, ціни вказані в USD

    ...freelancer who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in

    $519 (Avg Bid)
    $519 Сер. заявка
    37 заявки

    I am looking for someone that know how to read engineering drawings and can give the dimensions of the windows and doors of the home. This is a RUSH job and we will need these values asap. Thanks

    $35 (Avg Bid)
    $35 Сер. заявка
    10 заявки
    Architecture work in Revit 6 дні(-в) left
    ПІДТВЕРДЖЕНО

    We are looking for a Draftsman to draw up plans in Revit. The candidate must be from the UK and have good UK building regulation knowledge and be able to do technical c...looking for a Draftsman to draw up plans in Revit. The candidate must be from the UK and have good UK building regulation knowledge and be able to do technical construction drawings.

    $18 / hr (Avg Bid)
    $18 / hr Сер. заявка
    21 заявки

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    $96 (Avg Bid)
    $96 Сер. заявка
    26 заявки
    white board movie 6 дні(-в) left

    Looking for a marketing video for my company. The purpose is to make a storyboard: Voice-over narration tells a story that accompanies the drawings as they progress. Hand with a marker draws pictures on a blank surface – in kind of a high-speed drawing. We have some ideas on the story line that we can pass along after some contact.

    $1045 (Avg Bid)
    $1045 Сер. заявка
    39 заявки
    Project for Rachbauer L. 9 дні(-в) left

    Hi Rachbauer L., I wanted to see if you could do some line drawing work... Would help probably if you looked up that site so you can see the line style I need. It needs to be few lines. I would send you the images and then would need the line drawings created for them. I will need several over time, I would like to try just one to see how it goes...

    $10 (Avg Bid)
    $10 Сер. заявка
    1 заявки

    We are redoing our kitchen and have drawings / elevations. Looking for 3d cad with color to assist with color/material selections.

    $133 (Avg Bid)
    $133 Сер. заявка
    43 заявки
    Edit two drawings 6 дні(-в) left

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    $12 (Avg Bid)
    $12 Сер. заявка
    35 заявки

    Create as-built plan (demo plan), new work floor plan and elevations drawings for Simpkins project

    $500 (Avg Bid)
    $500 Сер. заявка
    1 заявки
    Creating shop drawings 6 дні(-в) left

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    $139 (Avg Bid)
    $139 Сер. заявка
    58 заявки
    Need 2D technical drawing for a small project 6 дні(-в) left
    ПІДТВЕРДЖЕНО

    Hello, I need 5 technical drawings made for pedestrian street signs and a main entrance structure like in the pictures attached. The drawings must explain in details of the production of the items

    $136 (Avg Bid)
    $136 Сер. заявка
    34 заявки

    ...io/GQOOVLZP97V - This is just drawing - what we need to achieve is the way where a user can open the app, select the type of drawing and then start doing the drawings. The app will then be able to convert the drawings to AutoCAD file using the specified length and height. The printing shop will cut this on Acrylic to put together and make organizer

    $435 (Avg Bid)
    $435 Сер. заявка
    27 заявки

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    $156 (Avg Bid)
    $156 Сер. заявка
    18 заявки

    A client has selected some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions

    $164 (Avg Bid)
    $164 Сер. заявка
    19 заявки
    Trophy icon Logo for villa construction company 3 дні(-в) left

    ...can be represented by a geometric design. Maybe a flower- but the lines need to be strong and bold. 2. Part of the writing (not all of it) could take the style of architect drawings. Remember the company builds villas, so it needs to be bold and strong to represent the design and strength of construction. But it's also about selling the dream of living

    $30 (Avg Bid)
    Гарантований
    $30
    36 робіт
    CAD Drawings (House Elevations) 5 дні(-в) left
    ПІДТВЕРДЖЕНО

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    $22 (Avg Bid)
    $22 Сер. заявка
    35 заявки

    Modelling and assembly of dc motor with pulley belt drive Motor parts drawings Timing Belt Design and Assembly Brushless alternator 3 phase 50hz 1500rpm 18kw Alternator drive needs to belt connected to the pulley to drive the alternator it doesnt need to be super detailed, just needs to display the different componets and correct size ratio https://www

    $114 (Avg Bid)
    $114 Сер. заявка
    14 заявки
    Project for Vyacheslav K. 8 дні(-в) left

    ...design of 2 DC motors connected by a pulley with a few extra components. 3d file with a parts breakdown. Price is negotiable Modelling and assembly of dc motor Motor parts drawings Timing Belt Design and Assembly Brushless alternator 3 phase 50hz 1500rpm 18kw Alternator drive needs to belt connected to the pulley to drive the alternator https://www

    $36 (Avg Bid)
    $36 Сер. заявка
    1 заявки
    New Retail Gondolas & Counter Designs 5 дні(-в) left
    ПІДТВЕРДЖЕНО

    We are a shopfitting/merchandising/joinery company based in Melbourne, Au...[увійдіть, щоб побачити URL] and [увійдіть, щоб побачити URL] OUR CURRENT RANGE OF COUNTERS: [увійдіть, щоб побачити URL] We are seeking presentation drawings which will be showcased in our new catalogue and production files for the approved designs.

    $298 (Avg Bid)
    $298 Сер. заявка
    21 заявки
    Land Registry Drawing 5 дні(-в) left

    I need a drawing done to show access rights over an area of land to my property compliant to Land Registry guidelines. Existing title drawings have already been obtained

    $162 (Avg Bid)
    $162 Сер. заявка
    9 заявки
    Construction Drawings 5 дні(-в) left

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    $9 / hr (Avg Bid)
    $9 / hr Сер. заявка
    33 заявки

    ...or 3 and 4 and it is used to undo or tighten the lid. -PLEASE READ THIS DESCRIPTION CAREFULLY- I have already had a friend draw up the designs in auto cad i just want the drawings adjusted slightly, but i also need the tee piece drawn up on auto cad, and then all 4 disks and the tee piece 3d modeled so they can be printed out on 3d printer.(total of

    $35 (Avg Bid)
    $35 Сер. заявка
    13 заявки
    Trophy icon Industrial Yard Floor Plan and Layout 5 дні(-в) left

    We are looking to move our con...keep checking the brief as it will be updated frequently. Deliverable is a layout/floor plan in PDF and AutoCAD. We will be giving out the contract for the working drawings on Freelancer once we have a suitable layout. ***Edits 1. I have uploaded a PDF plan of the plot for those that cannot open the AutoCAD

    $500 (Avg Bid)
    Обраний Гарантований Прихований
    $500
    3 робіт
    BIM strategy and supporting documents/text 5 дні(-в) left
    ПІДТВЕРДЖЕНО

    ...the document is required, with no identifiers included so the Client can brand it as their own internal document. Software used is AutoCAD LT (2016) and full release, and drawings are currently undertaken as complete xref models with title sheet overlay’s zoomed up for annotation, and all layering is colour by layer and layers to the CiSFB convention

    $22 (Avg Bid)
    $22 Сер. заявка
    4 заявки
    Design project 5 дні(-в) left

    I need a logo designed. I am designer in Australia. Need help with concept drawings for logo. Sketch, hand drawn, line art style of design

    $39 (Avg Bid)
    $39 Сер. заявка
    68 заявки
    patent drawings 5 дні(-в) left
    ПІДТВЕРДЖЕНО

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    $140 (Avg Bid)
    $140 Сер. заявка
    15 заявки
    AutoCad drawings 5 дні(-в) left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    $13 / hr (Avg Bid)
    $13 / hr Сер. заявка
    61 заявки

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    $8 / hr (Avg Bid)
    $8 / hr Сер. заявка
    24 заявки

    We are digitizing a book and need someone to copy/extract the drawings/photos in the book (it will be in PDF format). There are about 10 pictures and 25 small, clipart like drawing (probably 2" x 2" or less). We would like a separate file for each. Thank you, Intern at a Historical Society in WA.

    $25 (Avg Bid)
    $25 Сер. заявка
    32 заявки
    Contsruction Drawings 5 дні(-в) left

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    $322 (Avg Bid)
    $322 Сер. заявка
    52 заявки
    CAD drawings 5 дні(-в) left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $111 (Avg Bid)
    $111 Сер. заявка
    11 заявки

    Hi, receiving every day 5 to 10 drawings in 2d in pdf or jpg or another format. All this date recorded by a smartphone camera. Drawing type could be hand scatch or computer generated kitchen plan top drawing and layouts. I need online tool which could help faster calculate square meters on how much materials in m2 is a need for that project. That would

    $14 / hr (Avg Bid)
    $14 / hr Сер. заявка
    1 заявки
    Trophy icon CAD drawings 5 дні(-в) left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $64 (Avg Bid)
    $64
    10 робіт
    Design project 5 дні(-в) left

    I need some graphic design. Submitting new jewelry design for patent. Need drawings.

    $116 (Avg Bid)
    $116 Сер. заявка
    30 заявки

    We need an "As Constructed" stamp created with our logo and details, fillable fields, tick boxes, etc...need an "As Constructed" stamp created with our logo and details, fillable fields, tick boxes, etc as per the attached detail. This will be used on PDF documents - plans and drawings to stamp them as completed before they are issued to our clients.

    $71 (Avg Bid)
    $71 Сер. заявка
    13 заявки
    Drawing Job 5 дні(-в) left

    ...are professional investors, men between 50 and 70 years old. We need to add some sort of "cover" and drawings according to the story, keeping on mind that this is not for children. This will be read by investors. What's Required: 1. Created drawings according to the story, so it looks like a storybook. 2. Create the 1st page similar to a cover 3.

    $20 (Avg Bid)
    $20 Сер. заявка
    7 заявки

    ...are professional investors, men between 50 and 70 years old. We need to add some sort of "cover" and drawings according to the story, keeping on mind that this is not for children. This will be read by investors. What's Required: 1. Created drawings according to the story, so it looks like a storybook. 2. Create the 1st page similar to a cover 3.

    $30 (Avg Bid)
    $30 Сер. заявка
    2 заявки

    ...are professional investors, men between 50 and 70 years old. We need to add some sort of "cover" and drawings according to the story, keeping on mind that this is not for children. This will be read by investors. What's Required: 1. Created drawings according to the story, so it looks like a storybook. 2. Create the 1st page similar to a cover 3.

    $93 (Avg Bid)
    $93 Сер. заявка
    5 заявки
    patent drafted 5 дні(-в) left
    ПІДТВЕРДЖЕНО

    Need a patent drafted for an invention of mind. I have cad diagram and technical drawings.

    $574 (Avg Bid)
    $574 Сер. заявка
    5 заявки

    Attached is a full set of architectural drawings - see document #1. Based on this drawings I need 3 High Resolution images of: 1. front rendering of the house. Please review example attached as document #2. I need EXACTLY the same level of details and same colors and materials used in the example. Important: A. show same colors and material like

    $280 (Avg Bid)
    $280 Сер. заявка
    83 заявки

    I will Send the Packing and a video to replicate the unpacking. Once I have the drawings of the circuits and battery I will provide it with instructions for each video. $500 for unpacking segment $500 for Battery version $500 for NFC/chip harvesting version $500 (TBA Version) $500 for PNG of all the important stages. I will describe or explain in

    $2500 (Avg Bid)
    Угода про нерозголошення
    $2500 Сер. заявка
    1 заявки

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    $31 (Avg Bid)
    $31 Сер. заявка
    28 заявки
    Rendered Drawings for a Office Furniture Line 4 дні(-в) left
    ПІДТВЕРДЖЕНО

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    $145 (Avg Bid)
    $145 Сер. заявка
    61 заявки

    We are a Electrical Control Panel Manufacturer in Noida. We design, manufacture and commission ACDB, PLC panels. We have been in business since 2014. We are a professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next few years....

    $20 (Avg Bid)
    Місцевий
    $20 Сер. заявка
    3 заявки

    $135 Using a mature set of structural drawings, estimate & thoroughly document the work effort to fabricate structural steel cut weld bolt erect 34 steel frames 7'5"W x 8'3"H x 15'-23'L Use 3 different industry bases that you propose:- including the most detailed Hours per item per type (cut, weld, drill, bolt, erect)

    $140 (Avg Bid)
    $140 Сер. заявка
    8 заявки
    Map GIS creation Civil engineering 4 дні(-в) left
    ПІДТВЕРДЖЕНО

    $130 Tak...dimensions, one per sheet. 6 sheets. (The lots are contiguous). Refer to government data (which we will provide) for angles of lot lines. Carefully check angles in your drawings for accuracy. Create north arrow. Carefully add/map onto your drawing the contour lines. Final work is 6 pdfs at 24" x 36", and 6 source files.

    $126 (Avg Bid)
    $126 Сер. заявка
    27 заявки
    3D component drawings 4 дні(-в) left

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    $277 (Avg Bid)
    $277 Сер. заявка
    101 заявки

    Hi, receiving every day 5 to 10 drawings in 2d in pdf or jpg or another format. All this date recorded by a smartphone camera. Drawing type could be hand scatch or computer generated kitchen plan top drawing and layouts. I need online tool which could help faster calculate square meters on how much materials in m2 is a need for that project. That would

    $175 (Avg Bid)
    $175 Сер. заявка
    19 заявки

    i will provide a detail of footing. i just need a structural drawings

    $18 (Avg Bid)
    $18 Сер. заявка
    34 заявки
    Home renovation plan 4 дні(-в) left

    I am renovati...ideas about this. I need the entire project to be done within a budget of £30,000. Please factor this into your designs. Must provide me: *Layout options *Working drawings for manufacturer and construction *Be able to assist with supplier and contractor sourcing and planning permit applications *3D rendering the final design

    $1612 (Avg Bid)
    Місцевий
    $1612 Сер. заявка
    7 заявки

    Топ-статті спільноти drawings