We want to build a Hydroponic system for farmers.
[Removed by Freelancer.com admin]
Basic Project
1) digital programmable disply in which it should real time and date in dd/mm/yyyy, real temp in C and real Humidity in% in main menu.
Display should start with WELCOME and our message.
2) It can be programmable to enable one relay output which will be connected to a valve.
a) We can enter the time for ON of relay in seconds/hour for number hours/ day
Ex : Valve ON __ Sec/Hour,Cycle : __Hours
OR
b) Relay should be on depend on the temperature settings and Humidity settings
Ex : Valve ON Temp __C, OFFTemp __C
Valve ON Humidity ___%,OFF Humidity___%
For above requirements please let us know the minimum required accessories and connection diagram with program .It will be a great help .
I am embedded system electronics engineer and have worked on artificial plant irrigation system with live monitoring and control on android app. i know this project very well as i have worked on it. i have also worked on smart parking system, home automation, etc.
please consider sending me a message so that we can discuss further
Hi, I am an embedded system engineer and also a robotics PhD researcher, I am experienced with c programming, arduino, and sensor / actuator interfacing, I can help you with the project. Please hire me
Hello!
I can carry out your project. I have all the necessary equipment (microcontrollers and modules) in my studio.
I've had experience in writing firmware for such devices.
But In fact, I need a more detailed description of the project.
Terms and cost will be specified after a full understanding of the task.
P.S. You can see the overview of completed projects in my profile.
https://www.freelancer.com/u/Gippopotam.html
Hi. Congratulations for using freelancer.com. Your project is really interesting and we can carry it out with some very practical components so that the user feels comfortable interacting with the device. The design would be formed by 4 parts: 1-Interaction (touch screen), 2-Control (Arduino nano microprocessor), 3-Moisture and temperature sensors and 4- relays for power management. I have made designs very similar to this one for irrigation systems in homes and farms.
I think a good display for this application could be this model: NX4024T032_011 (please search it in google). It is touch type and you avoid having physical buttons to operate the device. In addition the graphic environment is very friendly.
I recommend using several relays in case you want to control more than one valve or pumps.
Any question do not hesitate to write me.
I am to serve.
Thank you
regards
Pardo Darwin
Hi, I am kahan. I am electronic engineer and i am working on hardware and software side. I can make this as per your need and completed in time.
Waiting for further discussion.
Thank you
I am a mechatronics engineer i worked in this stuff for a long time
Try me
Relevant Skills and Experience
I am a mechatronics engineer i worked in this stuff for a long time
Try me
i have already made a lot of arduino projects for hydroponics, aeroponics aquaponics. I am an agronomist PhD in Aquaponics and my MsC is on arduino project for agricultural structures. Send me more details about the project and contact me if you have any further questions
Thanks in advance
I have developed many timer control system using arduino. also I have good experience in Temp & humidity sensors. also I will provide complete wiring diagram and all the support you required to complete your requirement. Thank you
I have worked on a number of projects with arduino .
One of my recent projects involved a node mcu and a relay for controlling smart street lights . I can program an lcd with a 4*4 keyboard with much simplicity and using clean code.I have designed a fully functioning smart lock with a raspberry pi .
The minimum required accessories would be
1 . A digital 12v relay
2. An arduino uno
3. A 16*2 lcd display
4. A 4*4 keypad.
The project plan :
I'd set a default value for min-max temperature and humidty values along with the "on-time" and time-period of the relay . When the system is up and running you could for eg. - use "A" from the keypad to setup humidity and temperature settings and "B"for relay settings. By default the system would show the current humidity and temperature values on the LCD display .
I have 7+ years of experience in embedded system development. I have worked on Arduino based projects. I am proficient in c / c++ based project development. We are looking forward to work with you.
