Non Linear Simulation

$30-250 USD

Закрито

Опублікований

almost 4 years ago

$30-250 USD

Оплачується при отриманні

We need a non linear simulation of a designed gasket. We are looking to hire someone to set-up and run a simulation for us, when the run is complete we want the run parameters and the files so we will be able to continuously run the simulation ourselves just materials other than the ones we will initially designate. The outputs we are primarily focused on are: % compression, contact stress, force applied within the elastic region (a graphical output of the linear-plasto shift), if you have the ability to determine if a seal has been created that is just a bonus. We would like the simulation to be done in Nastran Inventor, Fusion 360, or ANSYS, we are willing to download other software as well if you have a strong recommendation for software you believe to be the best for the job. You will also be asked to sign an NDA. We project that a skilled individual should be able to complete this simulation in less than one hour as the design is already complete. The perfect candidate would be able to: complete the task, send us a walk through for future set ups, potentially have a live-meeting for questions about software usage.

ID проекту: 26454388

Про проект

18 пропозицій(-ї)

Дистанційний проект

Активність 4 yrs ago

Хочете заробити?

Переваги подання заявок на Freelancer

Вкажіть свій бюджет та терміни

Отримайте гроші за свою роботу

Опишіть свою пропозицію

Реєстрація та подання заявок у проекти є безкоштовними

18 фрілансерів(-и) готові виконати цю роботу у середньому за $164 USD

@afzalwaqas94

Hi! Greetings! I am a Mechanical Engineer with expertise in Mechanical Design. I have done projects that include Design of Telescopic Knuckle Boom, Design of Steel Space Frame Chassis for Formula SAE Vehicle, Design of Hydraulic brick machine, etc. Given my experience with design projects, I believe I am the right person for this job. I can show you my previous work if you want. For this project, I will use ANSYS Workbench for FEA. I will provide analysis files along with video of simulation setup. Further, I will provide a rich technical report explaining all the results and steps involved in analysis. Kindly contact me to discuss further. Regards,

$200 USD за 2 дні(-в)

4,7

(62 відгуки(-ів))

6,3

@sajjadtaghvaeifr

Hi, I have a lot of experience in designing machines and parts for manufacturing including robotic devices, agricultural machinery, packing machine, etc. I am expert in Solidworks, CATIA, inventor and autocad. I've done lots of projects on similar to yours. You can see portfolio for my previous projects. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

$140 USD за 7 дні(-в)

4,7

(16 відгуки(-ів))

6,0

@megiengineers7

Hello, I am a mechanical graduate working as FEA engineer. I have checked all input files/details. I'd be very happy to discuss this further and get started for you as soon as possible. Technical skills: Analytical calculations in mechanical core subjects, Mathematics, report writing. Software skills: Ansys, Hyperworks, Catia, Creo, Solidworks, Matlab,Excel,PPT,Word Non technical skills: sketching, logo design, poster designing. My profile: https://www.freelancer.in/u/gophaneishwar7 Regards, Ishwar G

$100 USD за 5 дні(-в)

5,0

(24 відгуки(-ів))

5,3

@MustafaFECFD

Hello I am a mechanical and aeronautical engineer with 5 years experience based on finite element method in aerospace industry. I am professionally using Ansys Apdl and Abaqus. I can perform any analyses including structural and dynamics. I have experience on nonlinear problems such as buckling, plasticity and excessive deformation. Pls send me message via chat for more information. King regards.

$167 USD за 2 дні(-в)

5,0

(8 відгуки(-ів))

4,0

@MattAngadiyil

I am a Mechanical Engineer I can do it in Ansys 2019. But I am a bit less experienced. So I am not sure , whether I can finish this in 1hour(as I have not used Ansys for a while). But I would like an opportunity. You can use me as a safety net. By safety net, what I meant is that, I wldnt feel offended if you go with another person, even, if i finish the project sucessfully. My 13 projects 1)Catia -Assembly & Simulation of robotic arm Ansys Apdl 2)Analysis of 5 structr includng an igs file 3)Analysis of Rectangular sheet with U-Notch & compared reslt w/h roark's formula Solidworks 4)Editng & Assembly of Pill Dispensr & its prts 5)Design, Assembly, 2d draft & Renderng of Breedng Box 4 Parrots 6)Design the mould die 4 an MS sheet metal ring. Sorcd the ring. 2d drafts & 3d model 7)Design & FEA analysis of the die & punch 4 a givn bathtub. Design calcs done 2 find the blank holdr force & Max drawing force which were used 2 find paramtrs of die & punch & sheet metal. Bathtub was modified accordingly. 8)3d Dsign with 2d drafts of a Scientific (soil testing apparatus) 9)Motion analysis of a Garage door. Researchd $ formulated equatns. Engg desgn calcs, 4 selectn of sprng & motr,& Force supplied by torsion spring, & torq reqrd by the motor 10)Design of 12 beads into 3d model frm 2d pdf 11)Prepd BOM & fabricatn drawing 12)Cad Conv -Won a contest Given png used to make dxf AutoCad format of req scale & ratio. Used 4 glass laser cutting Creo 13)Assembly of parts

$120 USD за 1 день

4,8

(21 відгуки(-ів))

4,0

@rosdianaputra

Hello!. I have read your description and interested in your project. I am CAD Designer with experience in Automotive manufacturing industry and capable to do FEA simulation both in Inventor Nastran and Fusion 360. Please don't hesitate to contact me for further discussion. Thank you. Best Regards.

$140 USD за 5 дні(-в)

5,0

(2 відгуки(-ів))

2,9

@rudiarma

Hi, I am an engineer with 9 years of mechanical design experience. I am a Solidworks user with skills: Solid 3D modeling, sheetmetal, motion animation, rendering and more. Please contact us, we need to talk more about the project and reasonable prices. Regards, Rudi Arma W.

$90 USD за 3 дні(-в)

5,0

(1 відгук)

2,6

@lathaCAE

8+ years of expertise in non-linear finite element analysis, strong experience in using commercial finite element simulation tools.

$140 USD за 7 дні(-в)

4,4

(2 відгуки(-ів))

1,7

@berkaysyildiz

I am doing a master in mechanical engineering and i am interested about ansys. I have worked with ansys structural and fluent for 1 years. I did a lot of project and still i am developing myself.

$140 USD за 7 дні(-в)

0,0

(0 відгуки(-ів))

0,0

@Kaysferati

I am a Mechanical enginer. I have design projects such as elevator, 3D printer etc... And analysis projects such as pipe, radiator, wind turbine etc...

$220 USD за 7 дні(-в)

0,0

(0 відгуки(-ів))

0,0

@hungstarmusic

We specialize in analysis on hyperworks about materials. This non linear problem we have ever done.I see hyperworks is not on the request list, if you agree we would like to receive the project. Thanks

$30 USD за 7 дні(-в)