Find Jobs
Hire Freelancers

I need WaterCAD/GEMS designer urgently !!!

$250-750 USD

Завершено
Опублікований over 4 years ago

$250-750 USD

Оплачується при отриманні
We need a result of hydraulic analysis of water networks in residential complex which consist of 130 villas in addition to STB tank and other commercial buildings The total distance of the piping is 8 KM approximately, the main distribution line diameter is 160 mm of HDPE material and the branches are 110mm HDPE material. There are buried valves, air release valves, control valves in the network. The main supply of water is coming through a pip diameter 180mm with pressure of 5 bar (upto 5.5 bar) and the daily consumption of water is between 550 to 620 m/day. All AutoCAD drawings of network, levels, profile, and detail drawings of chambers are available Requirements: To do a hydraulic analysis of the network in waterGEMS/waterCAD
ID проекту: 21343965

Про проект

15 пропозицій(-ї)
Дистанційний проект
Активність 5 yrs ago

Хочете заробити?

Переваги подання заявок на Freelancer

Вкажіть свій бюджет та терміни
Отримайте гроші за свою роботу
Опишіть свою пропозицію
Реєстрація та подання заявок у проекти є безкоштовними
Доручений:
Аватарка користувача
Civil engineer with a master in hydraulics. I have been working in water systems from 2006 including water modeling, pressure, flow control stations and fire event scenarios. I can develop and deliver a reliable model. As part of the basic information send pipe specs (material, inner diameter), control/pressure/flow valve catalogs and flow demand in each point of the network.
$500 USD за 10 дні(-в)
4,7 (2 відгуки(-ів))
3,8
3,8
15 фрілансерів(-и) готові виконати цю роботу у середньому за $484 USD
Аватарка користувача
****** ma shaa Allah ****** I'm are professionals in ✔️MATHEMATICS, ✔️MATLAB, ✔️SOLIDWORKS, ✔️ANSYS FLUENT, ✔️PHYSICS, ✔️COMSOL ✔️PDF to Doc or all format and versa I am a boss. ⭐⭐⭐ Major skills and Qualifications ⭐⭐⭐ ✅DSP and Image Processing ✅Face Detection / Recognition / Classification & Object Tracking ✅ STATISTICS, R, Probability ✅Mathematics: GA, NN, CNN, Machine & Deep Learning ✅Physics: Mechanics, Nuclear physcis, electronics, Optics. ✅Signal processing: FFT/DSP, Computer Vision ✅Mechanics: FEA/CAD/CAM, Robotics, CFD ★★★ Software tools I am using: ★★★ ✅OpenCV, OpenGL ✅Matlab & SIMULINK /Simulation ✅Solidworks, Ansys Fluent, Solidworks ✅Androied,JacaFx,Larval @ If you keep in touch with me, you will be satisfied with my best result! ❤Thanks❤
$500 USD за 1 день
4,7 (59 відгуки(-ів))
5,3
5,3
Аватарка користувача
I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.
$500 USD за 7 дні(-в)
4,7 (16 відгуки(-ів))
5,1
5,1
Аватарка користувача
Hello sir, Greetings from Gaurav... we will provide you work with 100% satisfaction. we are working in designing field for a 5 years. we are working with software's like.... #Autocad #Solidwork #Ansys #CAD #CAM #CFD#Abaqus #Structural engineering # Ansys workbench #Ansys Fluent #MATLAB #Creo parametric # Electrical Engineering #Mathematics#Physics #Civil engineering #Interior design #Mechanical engineering #3d Modelling let's message me so we can talk in details about project. Thank you
$500 USD за 5 дні(-в)
4,9 (10 відгуки(-ів))
3,4
3,4
Аватарка користувача
Dear Concern, I am interested to do the job. I have gone through your autocad drawing for understand the exact scenario. I am a water supply expert and have completed many hydraulic analysis projects for fortune companies as well as improvement of existing system or proposed system. Also I have a very good experience of Watergems/watercad software and currently working on the latest connect version. I can do your job by the following processes: 1. Start analysis with demand calculation 2. Checking the elevations 3. Check the tank capacity with required demand and supply pattern 4. Check the pipe diameter is adequate or not. 5. Check the control valves 6. Maintain the pressure head, velocity and pipe headloss gradient 7. Proposal for any improvement. 8. Detailed design report. So, please consider me for the project. Best Regards,
$277 USD за 3 дні(-в)
5,0 (1 відгук)
1,2
1,2
Аватарка користувача
HELLO SIR I AM ENGINEER OF WATER SUPPLY AND IT'S MY FIELD IN THIS PROJECT, IF you are interssted about my profile contact me, THANK YOU
$650 USD за 7 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
I want to work Relevant Skills and Experience Well I love working as engineers
$555 USD за 10 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
I was excited to learn about your advertisement for the post of an AutoCAD designer on the website (mention the name of the job portal or the website here). I have been looking for this job position for quite some time. For this reason, I have enclosed my resume with this letter for your further attention. I am a goal-oriented person and qualified for the profession of an AutoCAD designer. I have been employed as an AutoCAD designer for the past Eighteen years. I am a BA (Humanities) graduate and Mechanical Draughtsman. I have a great analytical as well as a technical mind. I have can work on a project that involves talent as well as expertise that you assign me. I am creative, motivates and scientific and I guess all these qualities are important for a profession like an AutoCAD designer. This is an overview of what I have and can provide to your company. Please consider my enclosed resume and do let me know if I can meet you. I can be contacted at (contact details) to discuss the parameters of this position in detail. Thank you for your consideration and time. I look forward to hearing from you soon. Sincerely,
$500 USD за 7 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
I am a phd holder in water resources, and i am a waterGEMS, water CAD, SewerGEMS, expert. I can carry out your task professionally in very short time. As a Hydraulic expert i did similar tasks for international clients like WorldBank. I am also a lecturer in Hydraulic Engineering department and i have special tutorials regarding WaterGEMS and SewerGEMS. Its my area. I believe you will be proud of your results.
$500 USD за 2 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
Master degree holder and a teaching assistant in the american univeristy in cairo, while also a senior design engineer for water,sewage and storm. i already checked the deisgn of Dakhleya and Sharkia in Oman and made an alternative design for the Transmission pipelines and have a background on AWWA TET and API and Oman Standards. A hydraulic model will be performed based on the required version with a calculation report and autocad drawing.
$450 USD за 7 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
Preparing hydraulic model on WaterGEMs software (version Connect Edition) or any other requested version. Hydraulic Analysis Report. Propose any necessary modifications to meet the project requirements (if necessary).
$500 USD за 7 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
I have so many projects related to your project. even I can send you my resume. I have published several article in international journal and I have done so many related projects. Relevant Skills and Experience I have so many projects related to your project. even I can send you my resume. I have published several article in international journal and I have done so many related projects.
$388 USD за 10 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0

Про клієнта

Прапор OMAN
Muscat, Oman
5,0
1
Спосіб оплати верифіковано
На сайті з вер. 18, 2019

Верифікація клієнта

Дякуємо! Ми надіслали на вашу електронну пошту посилання для отримання безкоштовного кредиту.
Під час надсилання електронного листа сталася помилка. Будь ласка, спробуйте ще раз.
Зареєстрованих користувачів Загальна кількість опублікованих робіт
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Завантажуємо для перегляду
Дозвіл на визначення геолокації надано.
Ваш сеанс входу закінчився, і сеанс було закрито. Будь ласка, увійдіть знову.