Find Jobs
Hire Freelancers

Project_06

$250-750 USD

Завершено
Опублікований about 5 years ago

$250-750 USD

Оплачується при отриманні
This device consist on a single PCB with an ESP32 as main SoC, acting as bridge between several input signals and the cloud. There is also an Ethernet transceiver on board to allow LAN connectivity instead of per WLan.
ID проекту: 19042683

Про проект

19 пропозицій(-ї)
Дистанційний проект
Активність 5 yrs ago

Хочете заробити?

Переваги подання заявок на Freelancer

Вкажіть свій бюджет та терміни
Отримайте гроші за свою роботу
Опишіть свою пропозицію
Реєстрація та подання заявок у проекти є безкоштовними
Доручений:
Аватарка користувача
During many years of work in the sector I have had a lot of experience in the design of electrical diagrams and PCBs, in the development of hardware and firmware writing for many controller families, creating various devices for companies and industries. happy to cooperate with you if selected.
$555 USD за 10 дні(-в)
2,0 (5 відгуки(-ів))
5,1
5,1
19 фрілансерів(-и) готові виконати цю роботу у середньому за $1 030 USD
Аватарка користувача
Hi I am experienced electronics engineer with more than 8 years of experience. I can do it for you I would like to know the components details that you have labelled as numbers I am waiting for your reply to start Regards
$1 500 USD за 10 дні(-в)
4,9 (260 відгуки(-ів))
8,0
8,0
Аватарка користувача
Hello, Hoping you are doing well. I checked carefully your requirements for this project. And I can help you design this project. Let me introduce some information about us: We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical. Our key skills are IoT, Embedded KIT, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +20 layers PCB. Experience designing high density boards include FPGA, Flash, DDRx, PCIEx, SATA, Ethernet, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TEST services. We can make any prototypes, even support mass production so you will don't worry about manufacturing files. We provide Service & Support even after completion of the projects,when ever necessary. Please contact me & we can discuss more. Best Regards, BK Tech
$1 350 USD за 15 дні(-в)
5,0 (28 відгуки(-ів))
6,7
6,7
Аватарка користувача
Hello, Have a nice day. We will design, build, test and deliver fully working prototype with all of the firmware. We have rich experience in developing customized electronics. Best Regards, Shahbaz.
$3 000 USD за 45 дні(-в)
4,6 (58 відгуки(-ів))
7,0
7,0
Аватарка користувача
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Circuit Design, Electrical Engineering, Electronics, Microcontroller, PCB Layout, I have made many PCB projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.
$750 USD за 10 дні(-в)
4,9 (19 відгуки(-ів))
6,6
6,6
Аватарка користувача
Hello there, I have read your project description and checked attached picture. I work in KiCad which is open source and you can easily follow me as I develop the board layout. I presume that you have schematic as you have labeled components in picture, with that this can be easily done. I invite you to give me a ping in chat so we could discuss more about it. Also feel free to check my profile and see my portfolio. Thanks, best regards.
$600 USD за 15 дні(-в)
5,0 (59 відгуки(-ів))
6,5
6,5
Аватарка користувача
Hi, let me know what scope of this project? Let me know what kind of sensor you want to use, and cloud services that you want to use. For Ethernet features, we can use Ethernet to serial. Regards Relevant Skills and Experience -Arduino -ESP32 -IoT -PCB design
$555 USD за 15 дні(-в)
4,6 (86 відгуки(-ів))
6,7
6,7
Аватарка користувача
Hi there I am an electrical engineer with 8+ years of experience. I have made many embedded systems projects based on ESP32. I can design and develop your project. Share more details regarding your project
$2 000 USD за 45 дні(-в)
4,8 (35 відгуки(-ів))
6,4
6,4
Аватарка користувача
Hi Sir, I am very interested in this project. I am already working on SoC of ESP8266 and ESP32 for some of my own projects. I am using AWS IoT as cloud service for my projects. I am sure I can do your this work too. We can discuss further on chat and finalize milestone based price. Best Abdul Rehman
$555 USD за 20 дні(-в)
5,0 (9 відгуки(-ів))
4,0
4,0
Аватарка користувача
Hi there. I offer you the services for ESP32/PCB designs.I am designer expert with 10+ years of experience in Circuit designs, PCB designs, Zigbee/bluetooth,Wifi software development. You can check our designs in our portfolio. If you want, I will share more designs I completed so far through interview. So I like to discuss the job with you. Lets talk about your project through interview. Thank you.
$500 USD за 10 дні(-в)
4,3 (8 відгуки(-ів))
4,8
4,8
Аватарка користувача
Hi. I'm an electronic engineering student from Argentina. I've been working in freelancer.com for more than two years, and I've completed more than a dozen projects, all with good recommendations, you can check my profile. You will get from me the best effort to deliver a project that is up to your expectations and receive a good rate from your part. My bid consists of the design of the schematic + PCB design + Gerber files for production. Please, if you have any questions, feel free to ask me! Regards, Esteban.
$400 USD за 30 дні(-в)
4,8 (16 відгуки(-ів))
4,2
4,2
Аватарка користувача
i can designed your circuit with the proper sensors as per your request and design the PCB ..... PCB design will be in kicad and i will produce the the whole gerber file with KIcad files(including footprint that are not in stranded library (ex-esp32)) ... but i need to know more about your circuit first... do you have schematic... or did you checked the prototype...
$600 USD за 30 дні(-в)
4,9 (9 відгуки(-ів))
4,1
4,1
Аватарка користувача
Hello, I am a developer of electronic prototypes, I have a lot of experience with the ESP32, I also do pcb to measurements and firmware development of all the MCUs If you can give me the details, we'll talk. A greeting.
$777 USD за 10 дні(-в)
5,0 (4 відгуки(-ів))
2,2
2,2
Аватарка користувача
Hello! Dear I am an electrical hardware engineer. I have about 8 years’ experience in the area of electrical hardware and PCB. I’m currently dedicated to the development of custom hardware. My main skills are: • Custom development of electrical hardware • Design for manufacturability (DFM) • Schematic capture, BOM generation and PCB design layouts • Hardware design through: Altium Designer, DesignSpark PCB and Eagle I have the necessary experience to develop all the work you need.I have extensive experience taking projects from the prototyping phase to the industrial product. I can help you with your device. If you give me more details of the project, I can indicate how I will proceed to design the electrical hardware. If you want to clarify any questions, I am at your disposal. Sincerily Ever Quiñones.
$388 USD за 20 дні(-в)
5,0 (3 відгуки(-ів))
2,3
2,3
Аватарка користувача
Hello, my name is Gonzalo from Noone. We can help you with your project. We have been working in several projects related to embedded design. Please contact me in order to know more about this project Regards Gonzalo
$250 USD за 15 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
Hi, I'm an electronics engineer experienced on digital systems desing including programmable devices and pcb desing and prototyping. I usually work for 30€/h, but in medium-large projects i can do it for 25. This project seems to be a bit complex, but with the description I can't stimate how many hours should I spend to complete the task. Can you give me more details? Best regards, Marcos Taboada
$3 555 USD за 30 дні(-в)
0,0 (0 відгуки(-ів))
1,0
1,0
Аватарка користувача
Three years working with embedded systems. Experience with C, C++, C#, Java, Assembly, RTOS. I can make your hardware design and the electronic project.
$1 111 USD за 15 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
The task is done on the basis of time conscientiousness and accuracy of the results .Research is done on the given statement of focus and the outcome presented in an organised manner . The outcome of the research will be fulfilling the thesis
$617 USD за 13 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0

Про клієнта

Прапор SWITZERLAND
Löhningen, Switzerland
5,0
18
Спосіб оплати верифіковано
На сайті з жовт. 28, 2018

Верифікація клієнта

Дякуємо! Ми надіслали на вашу електронну пошту посилання для отримання безкоштовного кредиту.
Під час надсилання електронного листа сталася помилка. Будь ласка, спробуйте ще раз.
Зареєстрованих користувачів Загальна кількість опублікованих робіт
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Завантажуємо для перегляду
Дозвіл на визначення геолокації надано.
Ваш сеанс входу закінчився, і сеанс було закрито. Будь ласка, увійдіть знову.