Find Jobs
Hire Freelancers

Motors that operate synchronously when energized.

$250-750 USD

Закрито
Опублікований over 2 years ago

$250-750 USD

Оплачується при отриманні
Motors that operate synchronously when energized by PCB, App, remote control ect.
ID проекту: 31065266

Про проект

19 пропозицій(-ї)
Дистанційний проект
Активність 3 yrs ago

Хочете заробити?

Переваги подання заявок на Freelancer

Вкажіть свій бюджет та терміни
Отримайте гроші за свою роботу
Опишіть свою пропозицію
Реєстрація та подання заявок у проекти є безкоштовними
19 фрілансерів(-и) готові виконати цю роботу у середньому за $447 USD
Аватарка користувача
Best Motor Design Expert at your doorstep! Dear Client, We have lots of experience in Motors design so that we able to do this project for you. We can design a Motor that operate synchronously when energized by PCB as per your requirements. Please message us so that we can discuss in details what shall be step by step formula for Motor design. We couldn’t stop ourselves from bidding after going through the description as they are an exact match with our skill set and experience. We have experience in Motor based PCB design and know all the intricacies required to get the job done with perfection. With more than 15 Years of experience in PCB Design and Circuit Design in Altium, We can ensure you best quality work and before time delivery. Following is a brief list of expertise that we are carrying: 1. IOT products development 2. Microcontrollers based circuit design – STM32, STM8S etc 3. Smart Products like Smart watch - GSM/GPRS/GPS etc 4. Wireless Products - BLE/WIFI- ESP32/ESP8266/NRF24L01 5. Motor, Remote control Please answer the following questions: 1 What are your future plans with this project? 2. Are there any specific market standards like CISPER you are aiming? 3. What will be ambient temperature of this product? Let’s have a quick discussion for 5 mins where we would formulate a plan of action of how we shall take this project to the horizons of success. Regards Avi Tech Experts Quality is never an Accident
$500 USD за 2 дні(-в)
5,0 (57 відгуки(-ів))
7,7
7,7
Аватарка користувача
Thanks for Freelancer which gives chance to meet you. I hope you are good. I have read your description carefully and understand everything. I have 12 year experience on analog design, motor drive, microcontroller coding and PCB design. I have designed induction,BLDC,Step and DC motor drive before. I know all principles of motor drive and power electronics. I prefer using ESP32 for bluetooth and can develop code by using Arduino IDE.
$250 USD за 10 дні(-в)
4,8 (79 відгуки(-ів))
6,8
6,8
Аватарка користувача
Hello there, Greetings! I am a motor designer by profession and have been a part of EV industry for more than 4 years. I have high proficiency in motor designing, generator designing and electromagnetic FEA in static and transient conditions. I can also provide electromagnetic solution for customised design or design to be start from scratch. I have worked with following motors: 1. BLDC (Brushless Direct Current) 2. PMSM Radial (Inrunner and Outrunner) 3. Axial motors (dual stator/rotor) 4. IPM as well as SPM topology rotors. I have been using the concepts of Magnet Embraces, Halbach array and Reluctance torque in motor designing to have higher performance and efficiency. Currently, I am doing research on a magnet free motor that performs equally to BLDC/PMSM motors with any 3phase position sensing based sin/Trapezoidal controller. I am working on STM based BLDC Motor controller too. I have good knowledge of Li-ion batteries NMC and LFP 18650, controllers and BMS. And can also work on sourcing the parts. Also, I have been using Autodesk Inventor for 3D CAD Modelling and Ansys for FEA in order to design and optimisation, and can provide you with mechanical solutions service too if required. I will send you few of my previously performed electromagnetic FEA. Looking forward to working with you and making your task a success. Regards, Kartik Sheladiya  
$500 USD за 7 дні(-в)
5,0 (31 відгуки(-ів))
6,6
6,6
Аватарка користувача
Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 12+ years with Circuit design, PCB design, manufacturing functional prototyping with firmware programming and testing especially. I have developed many kinds of IOT and smart control devices in using Arduino, Raspberry pi 4, MCUs, Microcontroller. So that, your project is not problem for me. Here are some of the experiences that I built ago. - Schematic and PCB design and Layout using Altium Designer. - DDR, motor control, power converter, Keyboard, POE, UART, SPI, I2C, RF, BLE, LED lighting design. - ARM Cortex-M, DSP, MCUs(STM, Nuvoton and so on), Arduino, Raspberry pi experiences. I would be very grateful if you give me a chance to satisfy you. If you want, I can show you the products I've made until now to let you know I am the best choice. I'll do my best for you. Thank you for your time. Best regards.
$750 USD за 3 дні(-в)
5,0 (8 відгуки(-ів))
6,0
6,0
Аватарка користувача
Hi, Dear client! *********************************************************** SHARING IDEAS AND INSPIRATIONS FOR YOUR PROJECT. PROVIDING A GOLDEN OPPORTUNITY TO RECEIVE THE BEST TECHNICAL SERVICE. *********************************************************** Thanks for your kind post Nice to meet suitable me project. As an engineer with 10+ years of practical experience in motor designing. I can do your project immediately and perfectly. Please contact me. Best regards. Ait.
$500 USD за 5 дні(-в)
4,4 (37 відгуки(-ів))
6,0
6,0
Аватарка користувача
FREE OF COST CONSULTATION Dear Client, I have lots of experience in Motor Drivers Design so I will able to do this project for you. I can design Motors for you with PCB, Remote Controllers who will operate synchronously when energize while meeting all requirements for you. Please message me so that I can discuss in details, budget and timeline and could do it for you. I have read and understood your requirements and could do it for you in the least time and utmost superior quality. I have experience in Microcontrollers, Motor Drivers based PCB Design,, Circuit Design and could design it for you as per your requirements. I am having more than 15 years of experience in PCB Design, Circuit Design, Circuit simulation, IOT products development and building electronic products. The expertise of mine is in the following fields: 1. Wireless Products – BLE, Wi-Fi, NFC, Lora etc. 2. Power Electronics 3. IOT sensors interfacing 4. Microcontrollers- ESP32, STM32, STM8S, RL78 etc. 5. GSM, GPS, GPRS 6. Motor After reading your project details, I have certain queries and suggestions: 1. What is the application of this product? 2. What will be ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? Please try to answer these questions based on which I would be providing free of cost consultation. Waiting for your reply, Regards Hari Mohan Engineering for one is a magic for others
$400 USD за 2 дні(-в)
5,0 (5 відгуки(-ів))
5,2
5,2
Аватарка користувача
Hello, I hope this finds you well. I have just seen your project requiring; Electronics Microcontroller Electrical Engineering PCB Layout Arduino I believe that my 10-year experience in this field is what you need right away. Avoid the headache of looking further. Let's save time and focus on the real task. My proposed timelines and budget are just placeholder and an open for negotiation to increase or decrease as per the full requirements at hand. Allow me to prove how better my review can be. Smile all the way! Click the message button, so initiate the conversation. Regards, Fridah
$500 USD за 7 дні(-в)
4,5 (20 відгуки(-ів))
5,4
5,4
Аватарка користувача
Hi, I am an experienced engineer with skills in industrial motor control and robotics. You will get a high quality design , program to operate the motors, if you select me.
$750 USD за 3 дні(-в)
4,3 (8 відгуки(-ів))
5,7
5,7
Аватарка користувача
Hi there, Kindly share the details. I can help you in this project by designing the motors that operate synchronously when energized. I have specialization in PCB designing. Here is our PCB designing process:- Create the Schematic Create and Setup a PCB Link the Schematic to the PCB Define the Board Size and Layer Stack Place Components Insert Drill Holes Route Traces Verify Circuit Board Layout Add Labels and Identifiers Generate Design Files We will be glad to hear from you! Regards, Harjit Singh
$550 USD за 30 дні(-в)
4,9 (5 відгуки(-ів))
4,4
4,4
Аватарка користувача
Hi I need more details about your project We should talk about it I am an electrical engineer with expert in arduino an experience in pcb
$500 USD за 7 дні(-в)
4,6 (11 відгуки(-ів))
4,3
4,3
Аватарка користувача
Hi, I'd be more than happy to help with your project. I've had several years worth of experience working with Arduinos, and formed part in my school's Robotics team, where I gained experience driving motors using Arduinos and the Raspberry Pi. I've had experience designing and building PCBs, especially for IoT applications, so I'd be willing to help you with any aspect of your project. Please do get in touch with more details, I'd love to know more about your requirements.
$300 USD за 21 дні(-в)
4,8 (3 відгуки(-ів))
2,4
2,4
Аватарка користувача
Hello, I read your suggestion. I have rich experience in controlling various types of motor with MPU(like Arduino, STM32 and PIC...). I can complete your job successfully. Let's discuss more details over the chat. Thanks.
$300 USD за 7 дні(-в)
5,0 (2 відгуки(-ів))
2,1
2,1
Аватарка користувача
Hi, I have three years of working experience in Embedded systems on many microcontrollers from famous companies such as STM, Texas Instrument, Arduino, ESP32, PIC, and Raspberry, so I confidently believe that I can get your project done perfectly without any defects. The above description did not mention clearly, so please contact me for more detailed information. I hope that we will have a chance to work together. Thank you, and looking forward to hearing from you soon.
$250 USD за 2 дні(-в)
5,0 (2 відгуки(-ів))
1,8
1,8
Аватарка користувача
Motors that operate synchronously when energized. I am Minahil Zahid with vast amount of experience in multiple fields like; Finance & Economics, Accounting & Cost Accounting, Business & Management, Taxation & Auditing. I have achieved great amount of success in this industry by providing TOP NOTCH solutions to my clients. I always provide quality services & respect to my clients because I consider him/her as my BOSS. I provide friendly environment to my clients so they always feel comfortable and openly discuss their requirements which allow me to produce MAXIMUM results..
$250 USD за 1 день
5,0 (2 відгуки(-ів))
0,7
0,7

Про клієнта

Прапор UNITED STATES
Brooklyn, United States
5,0
3
Спосіб оплати верифіковано
На сайті з вер. 2, 2020

Верифікація клієнта

Дякуємо! Ми надіслали на вашу електронну пошту посилання для отримання безкоштовного кредиту.
Під час надсилання електронного листа сталася помилка. Будь ласка, спробуйте ще раз.
Зареєстрованих користувачів Загальна кількість опублікованих робіт
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Завантажуємо для перегляду
Дозвіл на визначення геолокації надано.
Ваш сеанс входу закінчився, і сеанс було закрито. Будь ласка, увійдіть знову.