Find Jobs
Hire Freelancers

ADC/DAC driver from an embedded micro project in C

$250-750 USD

Закрито
Опублікований over 5 years ago

$250-750 USD

Оплачується при отриманні
I have a unusual ADC/DAC/GPIO hybrid device connected to a Microcontroller via SPI. I need a driver for the ADC & DAC as well as digital IO from the device
ID проекту: 17753135

Про проект

31 пропозицій(-ї)
Дистанційний проект
Активність 5 yrs ago

Хочете заробити?

Переваги подання заявок на Freelancer

Вкажіть свій бюджет та терміни
Отримайте гроші за свою роботу
Опишіть свою пропозицію
Реєстрація та подання заявок у проекти є безкоштовними
31 фрілансерів(-и) готові виконати цю роботу у середньому за $538 USD
Аватарка користувача
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs, CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for electrical vehicles ,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$1 111 USD за 21 дні(-в)
4,9 (61 відгуки(-ів))
6,7
6,7
Аватарка користувача
Hello, I am Anthony from Sri lanka. We are a hardware designing & prototyping company. Why you should hire me ? - I have seven years of experience in the field and have developed many systems. - I have state of the art testing lab and PCB fabrication workshop. (I know you dont need fabrication) - I have many contacts in China. I can help you with mass producing this. Please contact me if you are interested. Thank you Anthony
$277 USD за 10 дні(-в)
4,8 (63 відгуки(-ів))
6,5
6,5
Аватарка користувача
Hi, Let me Know your ADC,DAC,,and GPIO devices and your Microcontroller. I have used SPI on various Microcontroller since 2012, such as STM32,AVR,NXP,Arduino and they have similar architecture, just come with different Register controller. Let's discuss the detail over chat. Best Regards, Rijal
$250 USD за 6 дні(-в)
4,9 (72 відгуки(-ів))
6,2
6,2
Аватарка користувача
I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Composer Studio and MPLABX IDE . I deliver tested , neat and well-commented code that can be reused or modified for future development. More to be discussed once you contact me . BR, M.T.
$277 USD за 10 дні(-в)
4,8 (42 відгуки(-ів))
6,0
6,0
Аватарка користувача
hii sir How are you doing I have good experience in this field and i can do your work in best possible way, kindly text me so that we can discuss the work in more details thanks ...........
$555 USD за 10 дні(-в)
4,7 (43 відгуки(-ів))
5,9
5,9
Аватарка користувача
Dear Sir, I am Alexandre Malki an software and hardware embedded engineer. I am bidding to your offer since i think this opportunity is interesting for me and I am sure I can offer my knowledge to fulfill your tasks. I have been working on several embedded system using ADC / DAC from analog device/ linear technology and Texas instrument. I was programming on different platform such as STM32XXX (ARM Core M0 M1 M2 M3), Arduinos (Atmega), Ti MSP400, PIC32F, 8051, Allwinner ARM A53 (64 bits), TI DM3730 (A8 Core) iMx6 (Cortex A7) and so on... Also I have a great experience with FPGA (Spartan SP6) and SOC such as Zynq-7000. I have been developing softwares/firmware/drivers on different kind of environment, bare-metal (no-OS), embedded Real Time OS (FreeRTOS, ChibiOS, Zephyr) and Linux Kernel drivers. In addition, I own all needed devices to debug and solve issue during the development (oscilloscope, multi meter, welding devices etc...) I am a motivated/communicative/thorough person and I will do everything to deliver a work of quality on time. As your offer does not mentions some points, I have some questions: * What is the environment you are working on. * What Hardware do you use. I hope to hear from you. Best regards.
$444 USD за 20 дні(-в)
4,9 (4 відгуки(-ів))
5,1
5,1
Аватарка користувача
I can do your job.
$833 USD за 30 дні(-в)
4,8 (11 відгуки(-ів))
4,8
4,8
Аватарка користувача
Hi. I am interested in your project. I ve just completed some projects on stm32 devices. If you want, we can discuss details
$500 USD за 10 дні(-в)
5,0 (16 відгуки(-ів))
4,7
4,7
Аватарка користувача
Hello Sir, Greetings of the day..! I am Electronics Design Engineer with a 15+ years of experience of Designing and Developing Electronics Projects and have good experience in Electronics system design. We are the team of 10 people with greater experience in the relevant field. I am very much interested in your job post and I can achieve it with expertise mentioned below, by which we can also develop professional relation for a longer period of time. My Expertise: Electronics System Design. Software Developement on various MCU / MPU. Embedded Hardware Design. RF Modules Expertise on various Workbench / IDE We have successfully completed many industrial projects for which you can check my profile. Our team is dedicated to bring the best quality of service to the customer in the optimal cost and time. Also you will be getting a regular update on your project progress along with key milestones so that you can keep track on progress. Since we have just began our journey in freelancer we are providing our services for first 10 projects in better price to win customer confidence and understand method of working of freelancer. Hoping to work with you on this project and we can discuss further to begin the project. Regards.
$666 USD за 20 дні(-в)
5,0 (2 відгуки(-ів))
4,7
4,7
Аватарка користувача
Dear Sir, I have experience developing the application based on the custom PCB board. Worked on the STM, NRF, ATMEL. Please provide detail of the device. Price will depend on the work required.
$666 USD за 20 дні(-в)
4,9 (5 відгуки(-ів))
4,7
4,7
Аватарка користувача
I may help you but I need more info about used DAC, ADC and microcontroller. There is many devices present on the market, which one you used?
$555 USD за 10 дні(-в)
5,0 (4 відгуки(-ів))
4,2
4,2
Аватарка користувача
Hi, I read you project description and would like to work with you on this project. I am an electronic engineer and embedded systems developer. You may check my profile to know more about me and my past projects Thank you, Best Regards, Akilan
$260 USD за 10 дні(-в)
4,9 (14 відгуки(-ів))
4,4
4,4
Аватарка користувача
Greetings, I propose fastest delivery over top software quality here Please message if the proposal makes an interest Thanks,
$2 000 USD за 7 дні(-в)
3,5 (24 відгуки(-ів))
4,2
4,2
Аватарка користувача
Good working knowledge on ADC/DAC configuration through SPI and I2C communications. I had also working experience in gpio extenders. Good at modular programming and expertised in C programming. I had 3 years of working experience in audio domain. Looking forward to discuss further in this project.
$500 USD за 7 дні(-в)
5,0 (2 відгуки(-ів))
3,1
3,1
Аватарка користувача
I have 10 years of working experience in embedded software development. I have worked on I2C, SPI, ADC, DAC, PWM, IO module etc. Strong programming skills in C and Linux. I have working experience in linux device driver and kernel programming. I will deliver the work to you on time.
$555 USD за 5 дні(-в)
4,7 (8 відгуки(-ів))
2,5
2,5
Аватарка користувача
Greetings, I am an electrical engineer with professional embedded system development experience. I may be able to help you with the project. Please message me so we can discuss the project. I need to know the exact MCU and also the IC connected to it.
$555 USD за 10 дні(-в)
5,0 (6 відгуки(-ів))
1,4
1,4
Аватарка користувача
hello, as per your requirement we had work on SPI protocol. and also had good knowledge about ADC/DAC. so we can complete this project in time. and give a value for your money.
$444 USD за 15 дні(-в)
4,4 (1 відгук)
1,8
1,8
Аватарка користувача
I am experienced with SPI, ADC/DAC peripheral and embedded systems in which I worked with Texas Instruments, ST, NXP etc.
$500 USD за 10 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
I am not sure what you want? Do you have SPI driver already for the Microcontroller? This is the master part. Do you have SPI driver for the hybrid device? This is the slave part. I need the full specification of the microcontrller and hybrid device to do this.
$744 USD за 10 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0
Аватарка користувача
Hello, my name is Alexander. I am ready to carry out your project, but I have a number of questions on it. I design circuitry and circuit boards in KiCAD, Eagle and Altium Designer. I work with various microcontrollers(Atmel, STM, MSP), I write code in the following programming languages - с, с++, assembler. There is an experience with analog circuitry - ADC, DAC. Both with built-in microcontrollers, and with external microcircuits. Best Regards Alexander Sh
$555 USD за 10 дні(-в)
0,0 (0 відгуки(-ів))
0,0
0,0

Про клієнта

Прапор AUSTRALIA
Cannington, Australia
0,0
0
На сайті з вер. 12, 2018

Верифікація клієнта

Інші роботи від цього клієнта

ADC C driver
$250-750 USD
Дякуємо! Ми надіслали на вашу електронну пошту посилання для отримання безкоштовного кредиту.
Під час надсилання електронного листа сталася помилка. Будь ласка, спробуйте ще раз.
Зареєстрованих користувачів Загальна кількість опублікованих робіт
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Завантажуємо для перегляду
Дозвіл на визначення геолокації надано.
Ваш сеанс входу закінчився, і сеанс було закрито. Будь ласка, увійдіть знову.