Cisco Router config for CME, NAT and VPN

$300-1500 USD

Закрито

Опублікований

almost 17 years ago

$300-1500 USD

Оплачується при отриманні

I am looking for someone to configure a Cisco environment for a small office. The core of this environment is a 2811 router equiped as follows: -Advanced enterprise services -Communications Manager Express -VIC-2FXO -HWIC-1ADSL -DSP board I would like the router configured for NAT over the adsl connection and basic firewalling (UPnP enabled). CME configured to a fairly simple dialplan involving 2 PSTN lines and 1 SIP trunk. There are 2x7970 phones and 5x7912 which will need to be configured in along with a PoE Catalyst 3500. There will be 2 extensions. Finally I would like VPN configured for PPTP/SSL using 802.1x auth to a local Microsoft IAS setup. Along with two static IPSec VPNs to m0n0wall boxes.

System Admin

ID проекту: 157077

Про проект

6 пропозицій(-ї)

Дистанційний проект

Активність 17 yrs ago

Хочете заробити?

Переваги подання заявок на Freelancer

Вкажіть свій бюджет та терміни

Отримайте гроші за свою роботу

Опишіть свою пропозицію

Реєстрація та подання заявок у проекти є безкоштовними

6 фрілансерів(-и) готові виконати цю роботу у середньому за $617 USD

@NoomexSolutions

Hi, do for $280. I working in ISP company.I have big experience with cisco hardware. Also i have experience in performing installation of VOIP systems for SMB and SOHO companies(CISCO, D-link, Asterisk). I will need console to your CISCOs and appropriate servers and also it would be good to have access to a test workstation. Also i will need a "remote hand" guy at your premises. We can contact via skype by voice, or just IM. It is possible long term collaboration. My bids are low but the job is quality. Consider that such amount of tasks will require more than 3 days ...of course if you need a stable and workable solution. Payment thru this site...or we have to split it. Best regards, Denis

$300 USD за 6 дні(-в)

5,0

(5 відгуки(-ів))

3,0

@c0ntract0r

Hi please see PMB for further details.. many thanks c0ntract0r

$400 USD за 14 дні(-в)

5,0

(2 відгуки(-ів))

2,2

@riyoyo

In this case you need it be configured as a VOIP system where there is a trunk system. The easiest way for this purpose is by using Cisco Call Manager which manage the trunking system. But, basic routing should be configured as well such as VPN, NAT, etc. One question: would you allow me to remote administer your desktop for configuring your Cisco router over your Serial COM port? Or you could simply provide me the SSH/Telnet access where I could manage them remotely. But, I am sure you need to have them configured from scratch, so the first option would be better. Regards, Riyoyo

$300 USD за 3 дні(-в)

0,0

(0 відгуки(-ів))

0,0

@voipexpert

Dear Sir, Our company has over 8 years of experience in VoIP area in general and working with Cisco equipment in particular. Our team consists of highly qualified and professional engineers, most of them have Cisco certification (CCNA, ICND, CCAI, CCNP). We have been working with all the equipment you mentioned such as 2811 router, 7970 and 7912 IP phones etc. We use Cisco Catalyst and Cisco 3620 router in our own network and there will be no problems to configure your Cisco environment. If you are interested, please contact us at your convenience. Thanks and regards, VoIP Experts.

$600 USD за 5 дні(-в)

0,0

(0 відгуки(-ів))

0,0

@parry26

Hello This is a fairly simple setup for call manager express . Two static tunnels shouldnt be a problem and the ssl vpn will get forwarded to your server, However would need some physical assistance from some one who is computer savvy.

$1 500 USD за 7 дні(-в)

0,0

(0 відгуки(-ів))

0,0

@Dobrovolskyy

Dear Sir. I had very big expirience with Cisco devices (I have CCNA, CCNP, CCDA certificates). I'm woring in the one of dep of BNPP Group. I can configure your devices very quickly. I had worked with all of these devices and have no problem. If you interested pls contact with me.

$600 USD за 5 дні(-в)